DJI Ronin Part 8 Left arm standard is an original component developed for the DJI Ronin series of camera stabilisers. It functions as the left arm in the construction and is manufactured to maintain the mechanical balance and stability for which the system is known.

The arm is made of a robust material and comes in black, matching the rest of the equipment. As an original spare part, it ensures compatibility with DJI Ronin and preserves the product’s original functionality.

This part is intended for users who need to replace or repair the left arm on their Ronin stabiliser, and it is supplied as a single piece in the package.

The Elma Instruments Tri100 is a camera tripod made of aluminium, providing a good balance between low weight and stable construction. It is designed for use with measuring instruments and lasers where precise positioning is important.

The tripod is equipped with a standard 1/4-inch thread, making it compatible with a range of devices, including Leica, Elma X360 and X2 lasers. The variable height can be adjusted from 70 to 172 cm, providing flexibility in different work situations.

With a weight of 2.3 kg, the tripod is easy to transport yet stable enough to ensure accurate measurements and secure mounting of equipment.

The Tilta Hermit POV Support System XXL V Mount is an all-in-one system developed to enable first-person perspective recordings. The system is built around a lightweight and scratch-resistant carbon fibre helmet that serves as a base for mounting cameras and accessories.

The helmet supports multiple configuration options with rosette-based mounting arms that can be positioned both at the front and back. This allows the camera angle and balance to be adjusted as needed.

An adjustable battery plate on the back of the helmet allows the use of V-Mount batteries to power the camera and accessories. The battery plate is connected to a balance module that can be adjusted to offset the weight when the camera is mounted at the front.

The system includes counterweights for additional balance as well as multiple mounting points – including Cold Shoe, 1/4"-20, and 3/8"-16 threads – for attaching extra equipment such as wireless transmitters or lights.

The included 15 mm rod adapters and rods in various lengths allow the system to be integrated into rod-based camera rigs. With five different mounting options, the Hermit system offers a high degree of flexibility for sports, action, and film recordings.

The Manfrotto MVA524W camera kit is a vertical offset component consisting of two universal mounting units connected by a height-adjustable spacer. This design makes it possible to run two sets of SYMPLA rods in parallel but at different heights.

The solution is particularly useful when working with cameras and lenses where there is a height difference between the camera body, front lens, and L-bracket. The adjustable spacing allows compensation for this difference and ensures a stable and precise setup.

The kit is finished in black and weighs 630 grams, providing a good balance between robustness and manageability. It is designed to be part of Manfrotto’s modular SYMPLA system, used in professional video and film productions.

The Jabra Panacast 50 Table/Camera Stand is a dedicated table stand developed for the PanaCast 50 video conferencing system. It allows the camera to be placed as a freestanding unit on a table, providing greater freedom in meeting rooms and temporary setups.

The stand is finished in grey and has a discreet design that fits into professional environments. It is intended for desktop use and provides a stable base for the camera during meetings.

With adjustable height from 152 to 317 mm, the user can adjust the camera's position so that the viewing angle suits the room and participants. This makes the stand suitable for both fixed and flexible meeting solutions.

As an original Jabra accessory, it is designed to match the PanaCast 50 and 50 Room System, ensuring compatibility and a consistent aesthetic.

The Tilta TA-T18-E camera kit is a fully equipped set that provides the Sony a7S III with a solid and flexible rig system. The kit consists of a precision-manufactured camera cage that protects the camera while providing many mounting points for accessories such as microphones, lights, and monitors.

The cage is equipped with multiple 1/4”-20 and 3/8”-16 threads, two cold shoe mounts, a rosette connection for a side handle, and an opening for a 15 mm rod. The base also has several mounting holes, making it easier to balance the camera on gimbals.

The set includes both Arca- and Manfrotto-compatible quick release plates, a 15 mm LWS baseplate with corresponding rods, HDMI adapter and cable clamp, as well as an advanced left handle with power and run/stop function. This allows for an ergonomic and efficient setup for both handheld and tripod-based shooting.

The materials consist of aluminium, stainless steel, and wood, providing a combination of strength, durability, and comfort. With a weight of 1.36 kg and compact dimensions, the kit is suitable for professional users who want a modular and reliable system for their Sony a7S III.

The Manfrotto MVCCL camera cage is a height-adjustable camera cage with quick release, developed for larger DSLR cameras such as the Canon 1D series and Nikon D3X, D4, D5 as well as models with battery grips. The construction is lightweight yet stable, providing multiple options for mounting accessories on both the top and sides.

The cage has two anti-rotation mounts that are compatible with Manfrotto 244MICRO-AR and Arri standard mounts. The included handle can be reversed and placed over the lens area, allowing the use of XLR adapters. The handle can be folded for easy transport and can also be mounted on the vertical 15 mm rod as an additional grip.

The handle features a built-in cold shoe mount and a 15 mm rod clamp, allowing the attachment of various viewfinder solutions. An HDMI cable clamp is also included, which can be attached to the vertical rod to protect cables and ports during use.

The cage includes a height-adjustable 15 mm lightweight rod clamp, ensuring the correct distance between rods and the lens centre line, making it compatible with standard matte boxes and follow focus units.

Tilta - ing RED Komodo Kit A- Black is a camera cage that provides a robust and flexible frame around the RED KOMODO camera. The cage consists of interconnected side panels, a bottom panel and a top plate, which are attached directly to the camera.

The top plate is equipped with a cold shoe mount and 1/4"-20 threads, making it possible to mount a range of different accessories such as microphones, lights or monitors. The bottom panel has several 1/4"-20 mounting threads, making it easier to balance the camera on gimbals.

An adapter plate is included, making it possible to mount the cage on the Tilta 15mm LWS Baseplate for RED KOMODO Cage with quick release. The cage also has four rosette mounts – two on each side – as well as both 1/4"-20 and 3/8"-16 threads for mounting additional equipment.

The construction allows the setup to be customised as needed, and Tilta offers a range of compatible accessories such as handles, monitor mounts and baseplates that can further expand functionality.

The Manfrotto PADDED TRIPOD is a carrying case developed for transporting tripods with legs. It is made of ballistic nylon, which provides high resistance to wear and protects the equipment from shocks and scratches during transport.

The bag has a length of 120 cm and a weight of 1.5 kg, making it suitable for larger tripods. The padded construction provides extra protection, while the black colour gives a classic and professional look.

With its simple design and focus on functionality, the bag is a practical choice for photographers who want a reliable solution for storing and transporting their tripod equipment.

The Tilta TA-T01-B camera cage is designed for the Blackmagic Pocket Cinema Camera 4K and 6K and functions as a protective and modular cage around the camera. The construction allows for the mounting of accessories such as handles, monitors, microphones, and SSD drives.

The set is a so-called 'basic kit' version, which includes the full camera cage as well as accessories such as a top handle, SSD holder, USB-C cable, and HDMI adapter that fit the cage design. This makes it easier to integrate external devices into a compact and stable setup.

The cage is made in a grey finish and has threads in both 1/4" and 3/8" sizes, providing flexibility in mounting various equipment. It is suitable for users who want a more professional and ergonomic camera configuration.

The Manfrotto 244RC is an adjustable arm designed to give the photographer maximum freedom in setting up cameras and lighting equipment. The arm is equipped with a large locking knob that allows you to adjust the friction and lock the position precisely as needed.

The model features a quick release plate with a secondary safety lock, ensuring easy mounting and dismounting of the camera without compromising stability. It is compatible with standard studs and threads, including 5/8" male stud as well as 3/8" and 1/4-20" female threads.

With a maximum load capacity of 4 kg and a weight of 1.1 kg, the arm is suitable for both cameras and accessories such as lights or microphones. It works particularly well with Manfrotto’s 035S Super Clamp, making it ideal for flexible setups in studios or on location.

The Tilta ES-T20-B-V camera kit is an advanced camera cage and accessory set developed specifically for the Sony FX6. The kit provides both mechanical protection and a range of mounting options for accessories such as handles, monitors, wireless transmitters, and power supply.

The top plate is adapted to the FX6’s original handle and can be expanded with Tilta’s adjustable top handle, which includes a mount for the LCD monitor. It also features 15 mm LWS rod adapters, allowing accessories to be mounted above the lens.

The baseplate has a quick release and supports mounting of 15 mm rods both at the front and rear, providing flexibility for setting up matte boxes, follow focus systems, and other equipment. The dual Arri rosettes allow for the addition of handles or extended arms for handheld shooting.

The side arm provides additional protection for the camera and offers multiple 1/4''-20 and 3/8''-16 threads with positioning holes, so accessories can be securely mounted. It also has space for reusable camera labels, which can be used for clear identification in multi-camera setups.

The kit includes a V-Mount battery plate that mounts directly into the FX6’s battery compartment and can be connected to the top plate for extra stability. The battery plate has two 14.8V P-Tap outputs, a 14.8V 2-pin Lemo port, and a 5V USB port, providing flexible power supply for the camera and accessories.

The Manfrotto 143RC Magic Arm with Quick Release Plate is a professional arm designed to hold cameras, camcorders, or other equipment in exactly the desired position. The arm can be locked at multiple joints with a single handle, making it quick and easy to adjust the angle during shooting.

The model comes with a quick release plate based on Manfrotto’s 200PL-14 system, which ensures quick mounting and dismounting of the camera. The secondary safety lock prevents accidental release, increasing safety during use.

The arm fits 5/8" fittings and works particularly well with Manfrotto’s 035 Super Clamp, making it suitable for both studio and field work. With a maximum load capacity of 4 kg and a weight of 1.1 kg, it combines strength and flexibility in a compact design.

The Tilta TA-T18-FCC-B camera cage is a full camera cage that encloses the Sony a7S III and protects the camera from shocks and wear during shooting. The aluminium and stainless steel construction provides a strong and lightweight frame while maintaining easy access to the camera’s ports and controls.

The cage is equipped with multiple 1/4”-20 and 3/8”-16 threads, two cold shoe mounting points, and a rosette connection that allows various handles and accessories to be attached. There is also an opening for mounting a single 15 mm rod, providing flexibility in setup.

The base has multiple mounting holes, making it easier to balance the camera on gimbals, and various baseplates can be added to support rod systems or power supply solutions. The cage can be combined with Tilta’s quick-release top handle and side handles to create an ergonomic and modular setup.

The Manfrotto 420CSU tripod is a silver-coloured camera stand designed to provide stable support for cameras and lighting equipment. It is part of Manfrotto's series of professional tripods, known for their durability and precision.

The tripod is constructed with a focus on stability and flexibility, making it suitable for both photography and video production. The silver surface gives a classic and professional look, while the choice of materials ensures a long lifespan.

With its solid build and compatibility with various types of camera heads and accessories, the 420CSU can be used in many different shooting situations – from studio setups to outdoor use.

Tilta - ing RED Komodo Kit B-Tactical Gray is a camera cage developed specifically for RED KOMODO. The set consists of connected side panels, a bottom panel, and a top plate, which together form a stable frame around the camera.

The top plate has an integrated cold shoe mount and several 1/4"-20 threads, allowing the attachment of accessories such as monitors, microphones, or lights. The cage is equipped with both 1/4"-20 and 3/8"-16 threads as well as four rosette mounts – two on each side – providing many options for customising the setup as needed.

The bottom panel has multiple mounting points, making it easier to balance the camera on gimbals. An included adapter plate allows the cage to be attached to the Tilta 15mm LWS Baseplate for RED KOMODO Cage with quick release, providing flexible and fast mounting.

The kit is finished in a tactical grey colour and is designed to provide both protection and functionality in professional shooting situations.

The Manfrotto 816 tripod is a professional camera tripod designed for photographers who need maximum stability and strength. The tripod is made from a combination of aluminium and steel, providing a robust construction that can withstand intensive use in both studio and outdoor environments.

With a maximum height of 2.74 metres, the tripod offers flexibility in setup, while its high weight of 80 kg contributes to an extremely stable base, even when using heavy camera equipment. The maximum load capacity of 15 kg makes it suitable for professional cameras and lenses.

The tripod has one leg, making it particularly suitable for situations where quick setup and adjustment are necessary, while maintaining a high degree of stability. The black finish gives it a classic and professional appearance.

The Tilta TA-T18-A camera kit is a half camera cage that acts as a protective frame around the Sony a7S III. The construction provides both physical protection and the ability to mount accessories such as microphones, lights, or monitors via the many 1/4”-20 threads and a cold shoe mount.

The cage has several mounting holes at the bottom, making it easier to balance the camera on gimbals and other stabilisation systems. It can be combined with various baseplates to add rods or power supply modules as needed.

The set includes a lightweight quick release top handle with Arri locating pins, a NATO rail, a wooden side handle, and a cold shoe mount that can be attached on top of the handle. This combination provides a flexible and ergonomic setup for both handheld and tripod-based shooting.

The materials consist of stainless steel and wood, providing a balance between strength and comfort. With a weight of 680 grams and compact dimensions, the set is suitable for professional users who want a solid yet manageable camera accessory.

The Tilta TA-T01-A camera cage is an advanced cage for the Blackmagic Pocket Cinema Camera 4K and 6K, providing the camera with extra protection and many options for mounting accessories. The aluminium construction ensures low weight and high strength, making it suitable for both studio and field shooting.

The set includes a number of components that together form a fully equipped rig. It includes a full camera cage, a quick release top handle, a rubber-coated side handle, an SSD holder for Samsung T5, a 90-degree USB-C cable, a 15 mm LWS baseplate with two 15x200 mm rods, and a partial sunhood for the screen.

With 1/4" and 3/8" threads, the user can mount microphones, lights, monitors, and other equipment directly onto the cage. The grey finish gives a professional look, while the precise fit ensures stability and easy access to the camera’s ports and buttons.

The Tilta Lightweight Kit for Canon C70 is designed to protect the camera while allowing the mounting of a wide range of accessories. The kit consists of a Full Cage with multiple 1/4"-20 threads, locating pins, dual cold shoe receivers, and a NATO rail, making it compatible with Tilta side handles type IV and VI.

The cage features an ARRI-compatible rosette connection and a port for mounting rod accessories, providing flexibility for setting up, for example, follow focus systems. The rosette is positioned at the bottom, allowing an adjustable top handle to be mounted for better ergonomics during vertical shooting.

An additional safety attachment with a non-slip pad in the upper left corner increases stability, while the baseplate has threads for mounting on various quick release plates and is compatible with the ARCA receiver on the RS2 mounting plate.

The kit includes an EF Mount Lens Adapter Support, which provides extra support for RF-to-EF adapters, as well as a 15 mm LWS Baseplate Type V, which adds rod support for mounting matte boxes and other accessories. The low-profile baseplate is tailored to the Canon C70’s height and ensures proper alignment with the sensor’s optical centre.

The baseplate is compatible with Tilta Standard Dovetails and can also be used with other quick release systems via 1/4"-20 and 3/8"-16 threads. Note that the front and rear rod mounts on the baseplate are separate.

The Tiltaing Sony a7S III Lightweight Kit is designed to provide a stable and flexible foundation for filming with the Sony a7S III. The kit is made of aluminium and stainless steel, offering a good balance between low weight and high strength.

The design is tailored to the Sony a7S III, so the camera fits precisely in the frame and receives optimal support during use. The black finish gives a professional look, while the materials protect the camera from shocks and wear.

With a weight of 1.36 kg and compact dimensions, the kit is easy to handle both on a tripod and in handheld setups. It is suitable for users who want a reliable and modular system for video recording.

The Tilta TA-T30-FCC-B camera cage is a full camera cage that acts as a protective frame around the Sony a7 IV, a1, a7S III, a7R IV, a7R V, a7 III, a7R III, and A9. The construction provides both physical protection and the ability to mount accessories such as handles, microphones, and lights.

The cage is made of aluminium and stainless steel, providing a lightweight yet strong structure. It is equipped with multiple 1/4"-20 and 3/8"-16 threads with locating pins, cold shoe mounts, and a NATO rail, making it compatible with a wide range of Tilta accessories.

Additionally, the cage features an ARRI-compatible rosette connection and ports for mounting rods, allowing you to build a complete rig for professional video recording. An included screwdriver can be stored at the bottom of the cage for quick adjustments in the field.

The bottom of the cage has 1/4"-20 threads so the camera can be attached to various quick release plates, and it is compatible with the Tiltaing 15mm LWS Baseplate Type IV. Weighing under 200 grams, it is a lightweight yet functional accessory for professional camera setups.

The Tilta TA-T50-FCC-B is a full camera cage that protects the camera body while providing extensive options for mounting accessories. The aluminium and stainless steel construction ensures low weight combined with high strength.

The cage is equipped with several universal mounting points, including NATO rails, ARRI Rosette, Cold Shoe, and 1/4”-20 threads with locating pins. This makes it possible to add handles, lights, microphones, and other accessories as needed.

The design provides easy access to the camera’s ports and controls, while the bottom plate features an Arca Swiss connection that fits directly with DJI RS3 Pro, RS3, and RS2 gimbals. It can also be mounted on Tilta’s modular baseplate system via the same ARCA connection.

Included HDMI and USB-C cable clamps help secure cables during shooting, and the included Allen keys make it easy to adjust and fasten components.

The Tilta TA-T01-FCC-B is a so-called 'full cage' that encloses the entire camera body and protects it from shocks and wear during filming. The construction is made of aluminium and stainless steel, providing a good balance between low weight and high strength.

The cage is specifically designed for the Blackmagic Pocket Cinema Camera 4K and 6K and provides access to all ports and buttons while also offering multiple 1/4”-20 and 3/8”-16 threads as well as three cold shoe mounting points for accessories such as microphones, lights, or monitors.

The base has several mounting holes, making it easier to adjust the balance when the camera is mounted on gimbals. In addition, various baseplates and handles can be attached to adapt the setup to different shooting situations.

The cage can be combined with the Tilta 15mm LWS Baseplate Type I and other compatible modules, making it suitable for both studio and field productions.

The Tilta ES-T20-A camera cage is a specially designed camera cage for the Sony FX6, providing both mechanical protection and flexible mounting options. The construction is made of aluminium and stainless steel, ensuring low weight and high durability.

The top plate is shaped to fit around the camera’s original handle and supports the mounting of Tilta’s own top handle as well as monitor brackets. The built-in monitor holder allows the use of the FX6’s original screen mount.

The cage includes a Quick Release Baseplate with 15 mm LWS rods, allowing accessories to be mounted in front of or behind the camera. In addition, it has dual Arri rosettes for attaching handles or extended arms for handheld shooting.

The side arm adds extra protection and provides multiple 1/4"-20 and 3/8"-16 threads with positioning holes, allowing a wide range of accessories to be mounted. It also has space for reusable camera labels, which can be used for clear identification in multi-camera setups.

The Tilta Hydra Alien Car Mounting System Gold Mount is designed to work with compact gimbals and provides a lightweight yet robust solution for car-mounted filming. The system allows for dynamic camera movements without the need for heavy rig setups.

The construction consists of a flexible set of suction cups and plates that can be connected in various ways to achieve precise camera positioning. This modular approach allows the user to adapt the setup to the shape of the car and the desired camera angle.

A shock-absorbing arm system reduces vibrations and shakes while driving, while a spring-loaded cradle head solution allows the gimbal to be mounted in both normal and inverted positions. This provides freedom to shoot from high, low, or side-oriented angles.

The system is suitable for professional film productions, commercial shoots, and other situations where stable and creative car shots are required.

The Tilta TA-T18-FCC is a full camera cage that encloses the Sony a7S III and protects the camera from shocks and wear during shooting. The aluminium and stainless steel construction provides a robust frame while keeping the weight low to maintain balance in the setup.

The cage is equipped with multiple 1/4”-20 and 3/8”-16 threads, two cold shoe mounting points, and a rosette connection that allows various handles and accessories to be attached. There is also an opening for mounting a single 15 mm rod, providing flexibility for setting up additional equipment such as microphones, lights, or monitors.

The base has several mounting holes, making it easier to adjust the balance when the camera is used on a gimbal. Various baseplates can be added to adapt the setup to different shooting needs, including power supply and rod systems.

The cage can be combined with Tilta’s quick-release top handle and side handles, allowing the ergonomics to be adjusted according to the shooting situation.

The Tilta TA-T30-A-B camera cage is a camera cage developed for the Sony a7 IV, a1, a7S III, a7R IV, a7R V, a7 III, a7R III, and A9. It functions as a protective skeleton around the camera while allowing the mounting of accessories such as handles, monitors, and microphones.

The cage is made of aluminium and stainless steel, providing a lightweight yet strong construction. It is equipped with multiple 1/4''-20 and 3/8''-16 threads with locating pins, cold shoe mounts, and a NATO rail, allowing the setup to be customised as needed.

In addition, the cage has an ARRI-compatible rosette connection and ports for mounting rods, making it compatible with the Tiltaing 15mm LWS Baseplate Type IV and other Tilta components. An HDMI clamp is included so that cables can be securely fastened and protected from accidental pulling.

With a width of 150 mm, a depth of 116 mm, and a height of 63 mm, the cage weighs only 196.5 grams, making it easy to handle without adding unnecessary weight to the camera setup.